Wall Tie System Parts
Carbon steel Q235B/Q345B (galvanized/epoxy treated)
Stainless steel 304/316 (Corrosion-resistant type)
Standard length: 1-6 meters (customizable for longer)
Tie rod: Φ12-Φ20mm, length 1-6m (customizable)
Tensile strength: ≥500MPa
Operating temperature: -30℃ to 120℃
Customization cycle: 7-15 days (Non-standard size/material)
- Product Introduction
Qingdao Ruixinyang Machinery Co., Ltd. can produce Wall Tie System Parts, which are widely used in the fields of formwork support and exterior wall reinforcement for high-rise buildings, Bridges, tunnels and other projects. Our products, with high strength, corrosion resistance and easy installation as their core advantages, provide safe and reliable solutions for modern construction.
Product composition and functions
Wall Tie System Parts are mainly composed of the following components:
Tie Rod
Material: High quality carbon steel (Q235B/Q345B) or stainless steel (304/316), surface galvanized or epoxy coating treatment.
Specification: Φ 12 mm - Φ 20 mm diameter, length according to the demand for customization (standard 1 m to 6 m), tensile strength of 500 mpa or higher.
Function: through the wall template, with both ends fixed under the lateral pressure of concrete pouring.
Cone Nut & Washer Plate
Material: Cast steel or forged steel, galvanized for rust prevention.
Specification: Compatible with the diameter of the tie rod, taper 1:10, ensuring no loosening during locking.
Function: Fix both ends of the tie rod and distribute the pressure to the outer support system of the formwork.
PVC Sleeve
Material: High-density polyethylene (HDPE), resistant to acid and alkali corrosion.
Specification: Inner diameter matches the tie rod, wall thickness 2-3mm, length can be customized.
Function: Protect the tie rod, facilitate disassembly and reuse, and reduce concrete adhesion.
Support component (Bracing Bracket)
Material: Heavy-duty steel, surface hot-dip galvanized.
Load-bearing capacity: The lateral load of a single piece is ≥5kN, and the vertical load is ≥10kN.
Product advantages
High strength and durability
the core parts are made of national standard steel. After heat treatment, the service life is more than 10 years.
Modular design
Support flexible combination, suitable for different template thickness (100-500mm).
Efficient construction
installation without welding, can be operated by one person, saving 30% of labor hours.
Green economy
PVC casing and reusable galvanized parts, reduce the cost of consumables.
Application scenarios
High-rise buildings
Shear wall and column formwork support
Infrastructure
Construction of bridge piers and columns, and tunnel linings.
Special environments
Coastal areas, chemical industrial zones (316 stainless steel material is recommended).
If you need Wall Tie System Parts, you can contact us for a detailed quotation.
Hot Tags: wall tie system parts, China wall tie system parts manufacturers, suppliers, factory
